The astable multivibrator is formed by two bipolar transistor wired as shown in figure. This circuit produces a square wave with duty cycle depending on the conducing time of each transistor. Equivalent configurations can be made based in FETs or even in tubes.

 


 

 

 

 

Formula 1

Conduction time:

tp = 0.69 x R x C

 

Where:

tp is the conduction time of one transistor in seconds (s)

R is the resistance in ohm (Ω)

C is the capacitance in farads (F)

 

Note: For Q1 the conduction time tp1 is given by R1 and C1 and for Q2 the conduction time tp2 is given by R2 and C2.

 

 

Formula 2

Frequency:

f = 1 / (tp1 + tp2) 

f = 1 / 0.69 x (R1 x C1 + R2 x C2)

 

 Where:

f is the frequency in hertz (Hz)

R1, R2 are the resistances in ohm (Ω)

C1, C2 are the capacitances in farads (F)

 

 

Derivated formulas:

 

Formula 3

Square wave oscillator (50% duty cycle) - R1 = R2 = R and C1 = C2 = C

f = 1 / (1.38 x R x C)

 

 

Where:

f is the frequency in hertz (Hz)

R is the resistance in ohm (Ω)

C is the capacitance in farads (F)

 

Formula 4

Frequency as function of conduction time when R1 = R2 = R and C1 = C2 = C

f = 1 / (2 x tp)

 

 

Where:

f is the frequency in hertz (Hz)

tp is the conduction time in seconds (s)

 

 

Application example:

Determine the frequency of the free-runing multivibrator with the schematic diagram shown in figure.

 

 


 

 

 

Data:

R1 = R2 = 100 kΩ = 10 x 103

C1 = C2 = 10 nF = 0.01 ? x 10-6

 

Using formula 3:

f = 1 / (1.38 x 10 x 103 x 0.01 x 10-6)

f = 1 / (0.138 x 10-3)

f = (1 / 0.138) x 103

f = 7.246 x 103

f = 7.246 kHz

Datasheets


N° of component