Signal Tracer using the 741 (CB1533E)

Details: Written by: Newton C. Braga

 This circuit consists of an audio signal tracer using two 741 operational amplifiers. The output transformer is of the type found on old transistor radios. The power supply can be made by source or battery or with a voltage source of 6 to 12 V.

Circuit Bench

Locked resonant relay (CB8840E)
This circuit uses a resonant reed relay to recognize the frequency of an input signal. Adaptations...
Cascading the 4027 (CB152)
A divide-by-4 or two-bit binary counter can also be built using two flip-flops of the 4027 type as...
H Bridge Current Monitor (CB5258E)
This circuit was found in a 2005 Linear Technology component manual. The circuit is full bridge...