Operational Amplifier Gain 10 (MSB015E)

This is the basic operational amplifier configuration for gain 10. R2 can be changed to other gain. The circuit uses the Bode Plotter to have the characteristic of the amplifier. The power source must be dual with voltages in the range between 9 and 15 V. Other operationals can be tested. See the adjustments in the Bode Plottter to display the desired curve. Observe that the upper limit of frequency for this amplifier is about 100 kHz.










To download the simulation files and Netlist - click here (msb0015e.zip)

Circuit Bench