200mAh x 12V Battery Charger (CB4976E)

Details: Written by: Newton C. Braga

This 12V small battery charger has been found in US documentation. The circuit charges with a 75 mA current to the full load point set in a trimpot. The power transistor shall be fitted with a heat sink.

Circuit Bench

Parallel Mode Aperiodic Oscillator (CB5126E)
This circuit was obtained from an American 80's documentation. The transistors can be 2N2222 and...
PNP Constant Current Source (CB1242E)
The load current can be adjusted up to about 1 A. The transistor can be TIP32 or TIP42. The...
One Digit Counting Module (CB785E)
This TTL module can be used in counter and many of them can be cascaded to counts up to 99, 999,...

200mAh x 12V Battery Charger (CB4976E)

Latest

Circuit Bench

Datasheets