-
Description: Four independent R-S flip-flops are found in this package. The device has a common tri-state enable control for the four flip-flops.
-
-
Functional Diagram and/or Package:
-
-
-
-
Pin Names:
-
Vdd - Positive Supply Voltage [3V to 15V]
-
Vss - Ground
-
S1, S2, S3, S4 - Set
-
RST1, RST2, RST3, RST4 - Reset
-
Q1, Q2, Q3, Q4 - Outputs
-
EN - Enable
-
NG - Not Connected
-
-
Truth Table
-
-
-
-
Operation Mode:
-
In normal operation, S and RST are “0.
-
When S and RST are “1' the output goes to “1“ This is a disallowed state.
-
When EN is “0”, the output goes to the third state [high-impedance state]. With the input EN=1, the outputs are connected to the internal circuit.
-
-
Electrical Characteristics:
-
-
-
-
Other Devices:
-
The 4044 is similar, but it has NAND inputs.
-
-
Applications:
-
Strobed Registers
-
Digital Logic
-
Holding Registers [for Multimode Register Systems]
-
Four Bits of Independent Storage
-
-
Observations:
- Stages using this device may not be cascaded and are not suitable for counters or shift registers.
-
