Mechanical bistable (CB9228E)

Found in an Elektor from the 90s, this TTL circuit can be used as a shield without any bouncing problems. The circuit must be powered with 5 V.

| Clique na imagem para ampliar |

Low Pass Filter (CB5198E)
This circuit uses only passive components calculated for the desired frequency. We found it in an...
100 Hz High Pass Filter (CB6545E)
This fourth-order circuit was found on an 80's Radio Electronics. The power supply must be...
Resistive Sensor LED Control II (CB1299E)
This simple circuit controls the brightness of an LED from LDRs, NTCs, PTCs or other resistive sensors....